Table of Contents
Advertisement
Connecting the Camera
■
External Power Supply
12 V DC input can be used. Connect the included power connector as shown below.
Screwdriver
Tightening torque: 0.25 N·m (max.)
• The power supply should be within the following voltage range.
Voltage fluctuation within ±10% of 12 V DC
Current supply capacity of at least 1.5 A per camera
• When using a 12 V DC battery power supply, be sure to connect resistors of at least 0.5 –
1.0 Ω/20 W in series to the power line.
• For an external power supply, use a double-insulated device.
■
AC Adapter
Use the dedicated AC adapter PA-V18 (sold separately).
Strip
Approx. 5 – 7 mm (0.20 – 0.28 in.)
Power connector (included)
Recommended cable: Single wire/
stranded wire AWG No. 26 to 20
12
- Quick Links:
- Connecting the Camera
Hide quick links:
Advertisement
Table of Contents
