Table of Contents
Advertisement
Configuring your MFP
Configuring for TCP/IP
A number of settings are available for
customizing the MFP output to suit your
needs. Some settings or values are
displayed only if a specific option is
installed on your printer.
There are three methods to change the
copy default settings for your MFP. They
are 1) manually entering the information
through the MFP touch screen, 2) using
your browser to access the MFP IP
address and then entering the
Configuration menu, or 3) using
MarkVision™ Professional to access the
MFP IP address and enter the
Configuration menu.
Assigning a printer/scanner
IP address
If your network is using DHCP, an IP
address is automatically assigned after
you connect the network cable to the
printer.
1
Look for the address under the
"TCP/IP" heading on the network
setup page you printed earlier.
2
Go to "Verifying the IP settings" on
page 42, and begin with step 2.
If your network is not using DHCP, then
you must manually assign an IP address
to the printer.
1
From the Home screen, touch the
Key icon, and then touch System
Configuration.
2
Under Printer/Print Server, touch
Setup and Configuration.
3
Under the Print Server, touch
TCP/IP.
41
Advertisement
Table of Contents
