Table of Contents
Advertisement
Installing a hard disk
Warning:
Hard disks are easily damaged by static
electricity. Touch something metal such as the printer
frame before you touch the hard disk.
Installing an option card
Follow the instructions in this section to
install an optional hard disk.
If an option card has been installed, you
need to remove the option card before
installing the hard disk.
1
Align and press the ribbon cable
connector into the connector on
the system board.
2
Flip the hard disk over, and then
press the three posts on the
mounting plate into the holes on
the system board. The hard disk
snaps into place.
1
Remove the screw from the metal
plate that covers the connector
slot, and then lift the plate off.
2
Unpack the card.
14
Advertisement
Table of Contents
