Get Started; Initial Set Up - Instant Pot Pro 60 Manual

GET STARTED

INITIAL SET UP

01 Pull that Instant Pot Pro out of the box!
02 Remove the packaging material and accessories from in and around the multicooker
and make sure all the parts are accounted for. See Product, parts and accessories
for a full parts breakdown.
Make sure to check under the inner pot!
03 Wash the inner pot in a dishwasher or with hot water and dish soap. Rinse it well with
warm, clear water and use a soft cloth to thoroughly dry the outside of the inner pot.
04 Wipe the heating element with a soft, dry cloth to make sure there are no stray
packaging particles left in the multicooker base.
Don't remove the safety warning stickers from the lid (unless specifi ed on the
sticker!) or the labels from the back of the multicooker base.
05 You may be tempted to put the Pro on your stovetop — but don't do it! Place the
multicooker base on a stable, level surface, away from combustible material and
external heat sources.
Is something missing or damaged?
Get in touch with Customer Care by email at support@instantpot.com.au or by phone at
1800 251 643 or (02) 9317 1000.
Feeling keen?
• While you're doing the Initial test run (water test), read over Pressure cooking 101
to fi nd out how the magic happens, and read through Pressure control features for an
in-depth look.
Read the Important
safeguards before using the
appliance. Failure to read and
follow those instructions for
safe use may result in damage
to the appliance, property
damage or personal injury.
WARNING
Do not place the
appliance on a stovetop
or upon another
appliance. Heat from
an external source will
damage the appliance.
Do not place anything on
top of the appliance, and
do not cover or block the
steam release valve or anti-
block shield, located on the
appliance lid to avoid risk
of injury and/or property
damage.
instantpot.com.au | 11