Eletrical Mounting; Electrical Mounting In General; Signal Cable - Xylem mjk pHix Compact Manual

pHix® Compact
EN 4.10 Version 2007
US ONLY ALL OTHERS
pHix® Compact is mounted correctly when the electrode tip is emerged min.
½" in / 10 mm under the pipes inner pipe wall.

Eletrical mounting

Electrical mounting in general

pHix® Compact must not be installed in explosion hazardous locations!
pHix® Compact should be connected to an active 4-20 mA input or supplied
from a separate 12-30 VDC voltage source.
Max power consumption is 50 mW.
pHix® Compact 4-20 mA output(s) is galvanically separated from the liquids
potential.

Signal cable

pHix® Compact comes with either 1 or 2 galvanically separated signal outputs.
pHix® Compact with 1 x 4-20 mA output for pH or redox measurement.
Mounting / Eletrical mounting
19