Table of Contents
Advertisement
Check that the connectors are absolutely clean and dry.
1.
Lubricate the O-ring in acid-free grease or Vaseline.
2.
Check that the O-ring is placed correctly in the recess of the new
electrode.
3.
Check that the hole for the electrode in the pHix® Compact is completely
dry – if necessary use a dry cloth.
4.
Screw in the new electrode and tighten by hand. Note! Do not use tools!
Mounting / Mounting the electrode
pHix® Compact
EN 4.10 Version 2007
11
Advertisement
Table of Contents
