Ipv6 Menu - Lexmark T650dn User Manual

Network/Ports Standard Network or Network <x>
Menu item
Activate
On
Off
View Hostname
IP Address
Netmask
Gateway
Enable DHCP
On
Off
Enable RARP
On
Off
Enable BOOTP
On
Off
AutoIP
Yes
No
Enable FTP/TFTP
Yes
No
Enable HTTP Server
Yes
No
WINS Server Address
DNS Server Address

IPv6 menu

Use the following menu items to view or set the Internet Protocol version 6 (IPv6) information.
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Std Network Setup or Net <x> Setup
Description
Activates TCP/IP
Note: On is the factory default setting.
Lets you view the current TCP/IP hostname
Note: This can be changed only from the Embedded Web Server.
Lets you view or change the current TCP/IP Address
Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
support BOOTP and RARP.
Lets you view or change the current TCP/IP Netmask
Lets you view or change the current TCP/IP Gateway
Specifies the DHCP address and parameter assignment setting
Specifies the RARP address assignment setting
Note: On is the factory default setting.
Specifies the BOOTP address assignment setting
Note: On is the factory default setting.
Specifies the Zero Configuration Networking setting
Note: Yes is the factory default setting.
Enables the built-in FTP server, which allows you to send files to the printer using
the File Transfer Protocol.
Note: Yes is the factory default setting.
Enables the built-in web server (Embedded Web Server). When enabled, the
printer can be monitored and managed remotely using a web browser.
Note: Yes is the factory default setting.
Lets you view or change the current WINS Server Address
Lets you view or change the current DNS Server Address
Understanding printer menus
113
TCP/IP