Menu item
Eco-Mode
Off
Energy
Energy/Paper
Paper
Quiet Mode
Off
On
Run Initial setup
Yes
No
Paper Sizes
US
Metric
Output Lighting
Normal/Standby Mode
•
Bright
•
Dim
•
Off
Power Saver
•
Bright
•
Dim
•
Off
Description
Minimizes the use of energy, paper, or specialty media
Notes:
•
Off is the factory default setting. Off resets the printer to
its factory default settings.
•
The Energy setting minimizes the power used by the
printer. Performance may be affected but not print quality.
•
Paper minimizes the amount of paper and specialty media
needed for a print job. Performance may be affected but
not print quality.
•
Energy/Paper minimizes the use of power and of paper
and specialty media.
Reduces the amount of noise produced by the printer
Notes:
•
Off is the factory default setting.
•
On configures the printer to produce as little noise as
possible.
Instructs the printer to run the setup wizard
Notes:
•
Yes is the factory default setting.
•
After completing the setup wizard by selecting Done at
the Country select screen, the default becomes No.
Notes:
•
Initial setting is determined by your Country selection in
the initial setup wizard.
•
Changing this setting also changes the Units of
Measurement setting in the Universal Setup menu and the
default for each input source in the Paper Size/Paper Type
menu.
Sets the amount of light from an optional output bin
Notes:
•
In Normal/Standby Mode, the factory default is Bright.
•
In Power Saver Mode, the factory default is Dim.
Understanding printer menus
129