Insufficient Memory For Flash Memory Defragment Operation; Insufficient Memory To Collate Job; Memory Full - Lexmark T650dn User Manual

37 Insufficient memory for Flash Memory Defragment operation

Try one or more of the following:
•
Press the arrow buttons until
continue printing.
•
Delete fonts, macros, and other data in printer memory.
•
Install additional printer memory.

37 Insufficient memory to collate job

Try one or more of the following:
•
Press the arrow buttons until
stored and begin collating the rest of the print job.
•
Cancel the current print job.
37 Insufficient memory, some held jobs were deleted
The printer deleted some held jobs in order to process current jobs.
Press the arrow buttons until
37 Insufficient memory, some Held Jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Press the arrow buttons until

38 Memory full

Try one or more of the following:
•
Press the arrow buttons until
•
Cancel the current print job.
•
Install additional printer memory.
39 Complex page, some data may not have printed
Try one or more of the following:
•
Press the arrow buttons until
printing.
•
Cancel the current print job.
•
Install additional printer memory.
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Continue appears, and then press
Understanding printer messages
162
to stop the defragment process and
to print the portion of the job already
to clear the message.
to clear the message.
to clear the message.
to clear the message and continue