Using Intelligent Tracking - Bosch MIC inteox 7100i User Manual

MIC inteox 7100i
14

Using Intelligent Tracking

To activate the Intelligent Tracking feature, one of the following conditions must be met:
–
–
Notice!
The following actions occur if Intelligent Tracking is active:
i
All other IVA objects are disabled in scenes with Intelligent Tracking.
The camera automatically disables the display of compass headings. Once Intelligent Tracking
is set to Off, the camera resumes display of the compass heading. Refer to PTZ Settings, page
34 for details of the Compass feature.
Operation of Intelligent Tracking
The Intelligent Tracking feature behaves in one of the following ways:
–
–
–
–
Using Intelligent Tracking
Use the following options on the LIVE page to control Intelligent Tracking:
Note: If you do not see these controls on the LIVE page, ensure that the Show 'Tracking'
option is enabled on the LIVE Functions page. Refer to 'Live' functions, page 14 .
–
–
–
Bosch Security Systems
The Silent IVA option must be selected in the VCA page on the Settings tab. Refer to
Video Content Analysis (VCA), page 49 .
IVA must be active for at least one preset scene in the VCA page on the Settings tab. If
IVA is configured for one scene, then all other scenes have Intelligent Tracking enabled by
default. If a scene has Motion+ of IVA Flow activated, however, then Intelligent Tracking is
disabled for these scenes.
Camera detects an object in motion and automatically tracks the object
User actions always take precedence over Intelligent Tracking. If the camera is actively
tracking an object and a user takes control, the camera will attempt to track the object
after a period of inactivity.
An IVA alarm can trigger Intelligent Tracking to track a detected object
A rule that triggers an IVA event must be set. The following standard tasks can be set:
Object in field, Crossing Line, Loitering, Condition change, Following route, Entering field,
and Leaving field. Refer to the IVA 5.60 Operation Manual for specific information.
A user manually selects an object in the live image area to track
The Intelligent Tracking feature allows a user to click a moving object in the live image
display inside the LIVE page to identify an object to track.
Use AUX Command 78 to activate/deactivate Intelligent Tracking
Use AUX ON 78 to enable the Intelligent Tracking Auto mode. This command can be used
in conjunction with the rules engine.
Off: Disables Intelligent Tracking.
Auto: In this mode, the camera actively analyzes the video to detect any moving object. If
it detects movement, the camera begins to track the moving object. This mode is most
useful for scenarios where no motion is expected in the scene.
Click: In this mode, users can click an object moving in the live video image to enable the
camera to track the movement of the selected object. This mode is most useful for
scenarios where normal scene activity is expected.
User Manual
Using Intelligent Tracking | en
2022-09 | 1.18 |
77