Collating Print Jobs - Lexmark Optra W810 Reference

The following figure, on the other hand, illustrates a 4 Up print job in portrait orientation
with Vertical selected as the Multipage Order. The page images are paginated from top to
bottom.
You can select n-up printing from the printer driver, from MarkVision, or from the Finishing
Menu on the printer operator panel. Refer to the Technical Reference for detailed explana-
tion of the n-up printing commands.

Collating print jobs

Setting Collation On in the Finishing Menu lets you collate multiple copies of print jobs.
When you use the printer Collation feature to organize copies, the printer uses the Copies
setting to determine how many collated copies to print.
For example, if Collation is set to On, your print job is three pages long, and you request
two copies, your job prints in the following page order: 1, 2, 3, 1, 2, 3. On the other hand,
if Collation is set to Off, your job prints as 1, 1, 2, 2, 3, 3.
The Collation - Collated Copies (QTY) setting also lets you collate copies of print jobs, but
does not use the value of the Copies setting to determine how many copies to print. You
provide the number of collated copies with this setting. For example, if you set
Collation - Collated Copies (QTY) to 2, your three-page job prints in the following page
order: 1, 2, 3, 1, 2, 3.
Note: When Collation - Collated Copies (QTY) is set to any value except Off, the
printer ignores the value of the Collation setting.
Page 1 Page 3
Page 2 Page 4
Paper handling
111