Lexmark Optra W810 Reference page 65

PCL Emul Menu (continued)
Menu item
Orientation
Lines per Page
A4 Width
Tray Renumber
* Factory default
Printer setting
= Portrait*
= Landscape
The Orientation setting determines how text and graphics are
oriented on the page. Select Portrait to print text and graphics
parallel to the short edge of the print material. Select
Landscape to print text and graphics parallel to the long edge of
the print material.
= 1...255
= 60* (Country specific)
= 64* (Country specific)
Use the Lines per Page menu item to change the number of
lines that print on each page. The setting can range from 1 to
255 lines per page. The printer sets the amount of space
between each line (vertical line spacing) based on the Lines per
Page, Paper Size, and Orientation settings. Select the correct
Paper Size and Orientation before setting Lines per Page.
= 198 mm*
= 203 mm
The A4 Width menu item lets you select the width of the logical
page for A4 paper. When you select 198 mm, the width of the
logical page is compatible with that of the Hewlett-Packard
LaserJet 5 printer. When you select 203 mm, the width of the
logical page is wide enough to print eighty 10-pitch characters.
Assign Tray x (where x represents a tray from 1 to 4)
= Off*
= 0...199
= None
VIEW FACTORY DEF
Restore Defaults
= Yes
= No
Note: Only installed paper sources are displayed.
Changing printer settings
65