Configuration Menu - Lexmark Optra W810 Reference

Configuration Menu

Use the Configuration Menu to change printer operation settings. You can access this
menu by pressing the
Configuration Menu
Menu item
Maint Counters
Registration
Prt Quality Pgs
Panel Menus
* Factory default
and buttons when you turn on the printer.
Select Return
Printer setting
= Reset Hole Punch
= Reset Fuser
= Reset Transfer
When you empty the hole punch box on the optional finisher,
replace the fuser, or install the transfer kit, you must reset the
printer's internal page counter.
Press
Select
counter. Refer to the User's Reference for more information
about resetting the printer's internal counter.
Top Margin
= -50 – 50 (0*)
Tray x Left Mar
= -50 – 50 (0*)
Use the Registration menu item to adjust the registration for the
top margin on all the paper trays at one time, and adjust the left
margin for any individual paper tray. One unit of measure
represents 1/300 of an inch, providing a range slightly greater
than +\- 4 mm.
Select the margin you want to adjust, scroll through the range of
values for that margin, and then press
becomes the current setting and the printer prints a test page
with the new setting.
Press
Select
contains a combination of graphics and text. The remaining
pages contain graphics only.
Note: Make sure Paper Size in the Paper Menu is set to Letter,
Legal, or A4.
= Disable
= Enable*
Select Disable to lock the operator panel menus. Select Enable
to unlock the operator panel menus. See "Disabling operator
panel menus" on page 31 for more information.
Changing printer settings
to initiate the reset operation for the appropriate
to print the quality test pages. The first page
92
. The value
Select