5.
Move the media sensor by adjusting the
media sensor position adjustment knob, make
sure the gap or black mark sensor is at the
location where media gap/black mark will pass
through for sensing. Adjust the label guide to fix
the media position.
3.4.2 Media loading path
Gap & black mark
Empty
sensor
ribbon
roll
Paper guide
Ribbon
Print media
Backing paper
rewind spindle
6.
Close the print head mechanism on both
sides and make sure the latches are engaged
securely. Set media sensor type and calibrate the
selected sensor.
Model specifications, accessories, parts
and programs are mainly based on the
actual machine, subject to change without
prior notice.
22