Thermal transfer
mode ready
Direct thermal
mode ready
Open cover
PAUSE
FEED
Out of paper
Out of ribbon
Label gap/black
mark error
Cutter error
Print head
overheated
Other errors
Ethernet ready
WIFI ready
Ethernet+WIFI
ready
Blue(ONLINE) and Green(RIBBON) solid, and the device is ready to use.
Blue(ONLINE) solid, and the device is ready to use.
When the cover is open, a beep sound will be made, and Blue(ONLINE), Red
(ERROR), and Green(RIBBON) will flash.
Press the PAUSE button. When the Blue(ONLINE) flash, the printer will pause.
Press the FEED button to print as per demand, Blue(ONLINE) will flash.
When out of paper, a beep sound will be made, and Red(ERROR) flash
When out of ribbon, a beep sound will be made, and Red(ERROR) solid,
Green(RIBBON) flash
When label gap/black can't be found, a beep sound will be made, and
Red(ERROR) Blue(ONLINE) flash
When cutter can't be found, a beep sound will be made, and Blue(ONLINE)、
Red(ERROR) Both flash alternately, flash with Green(RIBBON)
When print head overheated ,a beep sound will be made, and
Blue(ONLINE)and Red(ERROP) alternately flash
When other errors ,a beep sound will be made, and Red(ERROP) and
Green(RIBBON) alternately flash
When the RJ45 network cable is plugged in and the connection is normal, the
Orange(COMM) flash
When the WIFI's AP or STA mode is connected, the orange(COMM) solid
When the RJ45 network cable is plugged in, and the connection is normal, and
the WIFI's AP or STA mode is connected, the orange (COMM) will be solid for
2 seconds and the orange(COMM) flash.
12