Mechanism Fine Adjustment To Avoid Ribbon Wrinkles - Gainscha Intelligent Series User Manual

4.3 Mechanism Fine Adjustment to Avoid Ribbon Wrinkles

This printer has been fully tested before delivery. There should be no ribbon wrinkle presented on the
media for general-purpose printing application. Ribbon wrinkle is related to the media width,
thickness, print head pressure balance, ribbon film characteristics, print darkness setting...etc. In
case the ribbon wrinkle happens, please follow the instructions below to adjust the printer parts.
Adjustabl Print Head Pressure Adjustment Knob has 5 positions for adjustment. The vertical
e Printer position adjustment knob on the right side of the print head can adjust the pressure of the
Parts right print head position.
Decrease the right pressure Rotatable Increase the right pressure
Sympto 1. Wrinkle happens from label lower left to
m and upper right direction.
Print Head Pressure Adjustment Knob
Vertical position adjustment knob on the right side of the print head
2. Wrinkle happens from label lower
right to upper left direction.
26