Gun; Disassembly; Assembly - Sames Mach-Jet User Manual

7.7. Gun

7.7.1. Disassembly

• Follow handle assembly disassembly procedure
• Remove the powder elbow and the powder pipe from the gun

7.7.2. Assembly

• Clean the gun, replace it if necessary. Change the gun seal making sure to position it correctly in
the gun groove.
• Proceed in reverse order for reassembly,
WARNING : To guarantee correct sealing each time the gun is disassembled, always
replace the O-ring.
Index revision : H
(see § 7.4.1 page
(see § 7.3.1 page
see § 7.3.2 page 31 then
35
32).
31).
see § 7.4.2 page 32.
6336