Table of Contents
Advertisement
6.8. Screen "D"
This screen is used to display the history of faults encountered.
[
1
]
[
1
]
: The history of the most recent faults
can be displayed in this area. The last fault
with its index (4, in this case) appears on
the screen. The fault's age index is indi-
cated on the left-hand side of the screen:
0.
Display of faults from oldest to
most recent.
Display of faults from most
recent to oldest.
If no faults are detected, the operator can not access screen "D".
The last 96 faults are recorded; the 97th alters the list and deletes the 96th, which is the preceding fault.
When a fault occurs, the high-voltage and powder supplies are disabled. A specific screen enables
identification of the fault and its number.
The operator confirms its recognition by validating with button "4".
Index revision : H
1
1
23
D
2
2
[
2
]
[
2
]
: This button enables
switching to the following
menu or positioning on the
cleaning screen by pressing
the button for more than two
seconds.
If no action is taken, the display
switches automatically to
screen "A" after one minute.
Immediate return to screen "A" if the trigger is
pressed.
6336
Advertisement
Table of Contents
