9. Troubleshooting
Symptoms
Elbow soiling
Drop in powder
Clogging of powder-supply hose
flow rate
Wear and fouling of powder
pump.
No high voltage:
- Incorrect connection of daisy chain
Powder does
following assembly/disassembly.
not adhere to
- Low-voltage cable cut off
the part
Incorrect U/I adjustment
Incorrect pneumatic adjustment
Index revision : H
Probable causes
38
Remedies
Disassemble the spray gun, clean it or
replace the elbow.
Unclog the powder hose using com-
pressed air.
Refer to powder pump user manual.
Check the three high-voltage unit con-
nections.
Replace the low-voltage cable.
Use "factory" settings.
Use "factory" settings.
6336