Limited Warranty - Matco Tools MPPC70DV Owner's Manual

This warranty applies to the original purchaser and is subject to the terms and conditions listed below.
This Limited Warranty is for new equipment sold after the above date, providing coverage for defects
in material and workmanship at the time it is shipped from the factory.
Limited to the warranty periods below, MATCO TOOLS will repair or replace the item under warranty
that fails due to defects in material and workmanship. MATCO TOOLS must be notified within 30 days
of the failure, to provide instructions on how to proceed with the repair of your welder and warranty
claim processing. Warranty period begins at the time the welder is purchased from an Authorized
MATCO TOOLS distributor. Keep your receipt as proof of purchase.
Limited Warranty is divided into these categories.
No Warranty, 1 year, 2 year and 3 year.
Normal wear items, MIG gun parts (contact tips,
nozzle, contact tip adapter, MIG gun liner), drive
roll, electrode holder, ground clamps, and
plasma torch parts (nozzle, electrode, diffuser,
cover) are considered consumable items and
are not covered under warranty.
1 Year Accessories Warranty
Parts and Labor on MIG gun parts (except those
listed under normal wear items), cables,
regulator, and plasma torch (except those listed
under normal wear items) are covered for 1 year.
Any shipping related to warranty repair is the
responsibility of the customer.
Page 2 of 16
EFFECTIVE APRIL 1, 2015
Warranty Periods
No Warranty

LIMITED WARRANTY

The 2 year warranty covers Parts and Labor on
items such as: transformer, reactor, rectifier,
solenoid valve, PC board, switches, controls,
gas valve, drive motor, drive system other than
drive roll and any other component that requires
the removal of the sheet metal to access. Any
shipping related to warranty repair is the
responsibility of the customer.
Warranty does not apply to shipping damage,
misuse and abuse of the unit and alteration of
the unit in any way.
This is a Parts and Labor warranty. Contact the
MATCO TOOLS distributor you purchased
the unit from. Retain your receipt in the case a
warranty claim is needed. No warranty will be
provided without the original receipt from an
authorized MATCO TOOLS distributor. To make
a warranty claim, contact your MATCO TOOLS
distributor. That MATCO TOOLS distributor will
contact the customer service department for
warranty instructions.
2 Year Welder Warranty
Voiding Warranty
Warranty Claim
2004058-12