Advertisement
LED Indicator
LED
Status
Indicator
Off
Solid green
Flashing green
Solid blue
System
Indicator
Flashing blue
Solid red
Flashing red
Off
Solid green
Flashing green
Port
Indicator
Solid yellow
Flashing yellow
Alternately flashing
yellow and green
POWERING & CONNECTING
Grounding the Switch
1. Remove the ground screw from the back of switch, and connect one
end of the ground cable to the wiring terminal of switch.
2. Put the ground screw back into the screw hole, and tighten it with a
screwdriver.
3. Connect the other end of the ground cable to other device that has
been grounded or directly to the terminal of the ground bar in the
equipment room.
Description
Power off
Booting
Upgrade
Normal use
Privisioning
Upgrade failed
Factory reset
• For all ports, port off
• For SFP ports, port failure
Port connected and there is no
activity
Port connected and data is
transferring
Ethernet port connected and PoE
powered
Ethernet port connected, data is
transferring and PoE powered
Ethernet port failure
~ 5 ~
Powering on the Switch
Connect the power cable and the switch first, then connect the power
cable to the power supply system of the equipment room.
Connecting Power Cord Anti-Trip(Optional)
In order to protect the power supply from accidental disconnection, it's
recommended to purchase a power cord anti-trip for installation.
1. Place the smooth
side of the fixing strap
towards the power
outlet and insert it into
the hole on the side
of it.
Ground Terminal
Ground Cable
Ground bar
~ 6 ~
Advertisement
