Advertisement
EN
OVERVIEW
The GWN7800 series are Layer 2+ managed network switches that
allow small-to-medium enterprises to build scalable, secure, high per-
formance, and smart business networks that are fully manageable. It
supports advanced VLAN for flexible and sophisticated traffic segmenta-
tion, advanced QoS for automated detection & prioritization of latency
sensitive voice/video traffic, IGMP Snooping for network performance
optimization, and comprehensive security capabilities against potential
attacks. The PoE models provide smart dynamic PoE output to power
IP phones, IP cameras, Wi-Fi access points and other PoE endpoints.
The GWN7800 series can be managed in a number of ways, including
the local network controller embedded in the GWN7800 series switch,
any GWN7000 series router with integrated local master, Grandstream's
free on-premise network management software (GWN Manager), as well
as Grandstream's cloud network management platform (GWN.Cloud).
The GWN7800 series are best value enterprise-grade managed network
switches for small-to-medium businesses.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperature outside range of 0 °C to 45 °C for
operation and -10 °C to 60 °C for storage.
• Do not expose the GWN7800 to environments outside of the following hu-
midity range: 10-90% RH (non-condensing) for operation and 5-95% RH
(non-condensing) forstorage.
• Do not power cycle your GWN7800 during system boot up or firmware up-
grade. You may corrupt firmware images and cause the unit to malfunction.
PACKAGE CONTENTS
GWN7800 Series Switch
4x Rubber Footpads
8x Screws (KM 3*6)
or
1x Power Cord Anti-
1x Console Cable
Trip (Optional)
(Optional)
1x 25cm Ground
1x 1.2m (10A) AC Cable
Cable
2x Rack Mounting Kits
1x Quick Installation
Guide
~ 1 ~
PORTS & LED Indicator
GWN7801/GWN7801P
1
3
4
2
8
No.
Port & LED
Description
1
Port 1-8
8x Ethernet RJ45 (10/100/1000Mbps),
used for connecting terminals.
Note: GWN7801P Ethernet ports support
PoE and PoE+.
2
1-8
Ethernet ports' LED indicators
3
Port SFP1/2
2x 1000Mbps SFP ports
4
SFP 1/2
SFP ports' LED indicators
5
Console
1x Console port, used for connecting
managing PC
6
RESET
Factory Reset pinhole. Press for 5
seconds to reset factory default settings
7
SYS
System LED indicator
8
100-240VAC
Power socket
50-60Hz
9
Lighting protection grounding post
~ 2 ~
5
6
7
9
Advertisement
