Tool Bar; Input And Output Setting - NewLine Vega Z Series User Manual

Tool Bar

Enter the Tool Bar submenu to set whether to display the tool bar.
Left: Tap to turn on/off the left tool bar.
Right: Tap to turn on/off the right tool bar.
Quick settings: Tap to turn on/off the tool bar on the Quick settings.

Input and Output Setting

Enter the Input and Output submenu to set the Home source and USB connection, enable new input source and
CEC auto.
Starting Source: Customize settings to connect to the signal source after power on.
Source preview: Tap to turn on/off the source preview.
New Input Source: After the New Input Source function is enabled, the system can automatically switch to the
screen of the newly connected signal source.
CEC Auto Power On: "CEC Auto Power On" is enabled, When the HDMI port of the panel is connected to a
CEC device (such as a DVD), and both the CEC device and the panel are turned off, if the CEC device is turned
on, the panel automatically turns on after receiving command from the CEC.
CEC Auto Power Off: "CEC Auto Power Off" is enabled, When the HDMI port of the panel is connected to a
CEC device, and both the CEC device and the panel are turned on, if the panel is turned off, the CEC device
automatically turns off after receiving the command; if the CEC device is turned off, the panel automatically turns
off after receiving the command.
HDMI 1/2 & DP EDID switch 2.0: Tap to choose the HDMI1.4 or HDMI 2.0.
69