MINAC Systems
USER MANUAL
63860.doc
1
INTRODUCTION
This manual provides step-by-step operation instructions for the MINAC standard
25/40 and 50/80 systems and MINAC 25 Twin systems. It also contains safety
information and instructions, and some simple corrective measures.
The operation instructions must be read thoroughly before the equipment is used.
Using these instructions, MINAC operators should be able to undertake correct and
safe operation. However, only qualified personnel should carry out general trouble-
shooting and maintenance tasks.
Output
power cable
HHT
Figure 2.
MINAC Standard 50/80
Induction Heater with
HHT 400S.
© For reproduction rights, see cover page.
Figure 1. MINAC Standard 25/40 Induction Heater.
Revision A
31 January 2005
Display and
keyboard
Switches and
indicators
Supply
power cable
Page 1