EFD MINAC 25 Twin User Manual page 21

MINAC Systems
USER MANUAL
63860.doc
Programming example
1. SELECT SEQUENCE MENU
Press F3 when in the Main Menu.
2. SELECT PROGRAM NUMBER
Press F0 until the number 2 is displayed.
3. SELECT SEGMENT NO 0
Press F1 and the number 0 is displayed.
4. SELECT SEGMENT TYPE
Press F2 if "STEP" is not already set as the segment type.
5. SELECT TIME UNIT
Press F3 until "1 m" is displayed.
6. ENTER NUMBER OF TIME UNITS
Enter the number 4.
<4> and <↵>
7. SET TARGET SETPOINT
Move the cursor down a line by pressing the down arrow key and enter the
number 80.
<↓>, <80> and <↵>
8. SELECT SEGMENT NO 1
Press F1 and the number 1 will be displayed.
9. SELECT SEGMENT TYPE
Press F2 if "RAMP" is not already set as the segment type.
10. SELECT TIME UNIT
Press F3 until "1 m" is displayed.
11. ENTER NUMBER OF TIME UNITS
Enter the number 5.
<5> and <↵>
12. SET TARGET SETPOINT
Move the cursor down a line by pressing the down arrow key and enter the
number 30.
<↓>, <30> and <↵>
13. SELECT SEGMENT NO 2
Press F1 and the number 2 is displayed.
© For reproduction rights, see cover page.
Revision A
31 January 2005
Page 18