Start; Main Switch; Programming The Mmi - EFD MINAC 25 Twin User Manual

MINAC Systems
USER MANUAL
63860.doc
6.2

Start

6.2.1

Main switch

Main
switch
Figure 11. MINAC 25/40 and 50/80 cabinet front, main switch
1. See figure 11. At the front bottom of the cabinet, turn on the converter's main
switch.
2. See figure 6. The following lamps and LEDs should light:
– AUX VOLTAGE lamp on the operating panel
– READY or FAILURE lamp
– LOCAL lamp
– HHT 1 lamp
The display on the Man-Machine Interface (MMI) briefly shows a presentation
screen followed by the Display Values Menu. This menu provides a graphic
presentation of the operational values during the heating process.
6.2.2

Programming the MMI

If the MMI is already programmed and no editing is needed, go to paragraph 6.2.3.
Otherwise, return to the MMI main menu by pressing F9 and perform the necessary
programming/editing.
1. Choose Control Functions (Activate Menu); there are seven types of control
functions:
© For reproduction rights, see cover page.
Revision A
31 January 2005
Page 25