Standby Error Codes; Code 02 : +15 V Supply Error - Siemens MULTIMOBIL 5C Troubleshooting Manual

Service Instructions
Multimobil 5C

8.3 Standby Error codes

8.3.1 CodE 02 : +15 V Supply Error

START
REMOVE CONNECOR X15 ON D915
& SWITCH ON THE UNIT
MEASURE +15 V ON X15
CONNECTOR
IS +15V THERE ?
YES NO
REPLACE D915 PCB REPLACE SMPS1
STOP
Siemens Ltd. Med India Version 5.0 Page 55 of 73
Copyright © SIEMENS LTD. All rights reserved. For internal use only