Table of Contents
Advertisement
Quick Links
Product Installation Guidelines
®
CliniLever
Stainless Steel Lead Safe
Gooseneck Sink Mixer
PRODUCT CODES:
− TM-SNKGX
SPECIFICATIONS
−
™
Lead Safe
stainless steel construction
−
Clean hygienic design
−
Low maintenance and easy to operate
−
Smooth round designs to facilitate easy cleaning and help reduce dirt and bacteria growth.
IMPORTANT: All CliniLever
good working order.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Construction
Finish
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without
notice.
© Galvin Engineering Pty Ltd
®
Taps are tested in accordance with AS/NZS 3718 and leave our premises in
™
½" BSP – Female (Flexi-hoses)
Aerator
Ceramic Cartridge
Min
50
Max
500
Min
5
Max
80
5.92
Stainless Steel
Stainless Steel
Version 2.1, 2 December 2021, Page 1 of 6
Advertisement
Table of Contents
Related Manuals for Galvin Engineering CliniLever TM-SNKGX
Summary of Contents for Galvin Engineering CliniLever TM-SNKGX
- Page 1 Ceramic Cartridge Working Pressure Range (kPa) Working Temperature Range (°C) Nominal Flow Rate (LPM) 5.92 Construction Stainless Steel Finish Stainless Steel NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without notice. © Galvin Engineering Pty Ltd...
- Page 2 Rough-In Dimensions INSTALLATION INSTALLATION COMPLIANCE: Galvin Engineering products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards.
- Page 3 Ensure water supply lines are flushed before connecting. − Connect the flexible hoses to the mains water as shown ensuring the hot and cold hoses are correct. − Test the tap for leaks and correct operation. © Galvin Engineering Pty Ltd...
- Page 4 Remove the flow regulating aerator. − shown. Inspect for debris and clean. Replace if necessary. 3. Reassemble − Reverse steps 2 & 1 to reassemble ensuring the orientation is correct. − Test for leaks and correct operation. © Galvin Engineering Pty Ltd...
- Page 5 Inspect for debris and clean. Replace if ensuring the orientation is correct. necessary. − Test for leaks and correct operation. Note: For cartridge replacement, use WaterMarked Standard/Universal 35mm Flat Cartridge. For more information, please contact Galvin Engineering © Galvin Engineering Pty Ltd...
- Page 6 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty. Ltd. hereby specifically disclaims all other warranties, express or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose.
Need help?
Do you have a question about the CliniLever TM-SNKGX and is the answer not in the manual?
Questions and answers