Advertisement
Quick Links
Product Installation Guidelines
®
CliniLever
Tap Type 54 Fixed 150
PRODUCT CODES
102.22.21.00
102.22.11.00
SPECIFICATIONS
−
The CliniLever
hospitals, aged care facilities, schools, and in-home care.
−
®
CliniLever
products provide state of the art features to comply with the latest healthcare guidelines.
−
The single lever for on/off, hot/cold temperature has a straightforward operation which simplifies hand
washing.
−
All CliniLever
−
Our highly sought after lever handle design can easily be operated with wrist or elbows.
−
The main body is made of solid dezincification resistant (DR) brass rod, with a DR brass fixed outlet.
−
Quick action subassembly includes brass ceramic cartridge component/jumper valve, with red and
blue indicator button on 150mm lever action handles.
−
Lead Safe™ brass construction*
IMPORTANT: All CliniLever
premises in good working order.
*As 'lead free' is not currently defined by law in Australia and New Zealand, we have based our definition of Lead Safe™ on the requirements of Sec. 1417 of the USA's Safe
Drinking Water Act (SDWA) and the relevant US standards NSF61 / NSF372. The SDWA defines 'lead free' as "not more than a weighted average of 0.25% lead when used
with respect to the wetted surface of pipes, pipe fittings, plumbing fittings and fixtures".
WARNINGS: Special attentions to be paid on notes, photos, images, or drawings of
assembly steps marked with the warning symbol.
TECHNICAL DATA
Inlet
Outlet
Headwork
Working Pressure Range (kPa)
Working Temperature Range (°C)
Nominal Flow Rate (LPM)
Construction
Finish
NOTE: Galvin Engineering continually strive to improve their products. Specifications may change without
notice.
© Galvin Engineering Pty Ltd
CP-BS Lead Safe Hospital Wall Bib
CLINILEVER CP-BS LEAD SAFE HOSPITAL WALL BIB TAP TYPE 54 FIXED 150
C/D
CLINILEVER CP-BS LEAD SAFE HOSPITAL WALL BIB TAP TYPE 54 FIXED 150
J/V
®
product range is primarily used for hand washing applications in medical facilities,
®
products provide laminar flow (not aerated).
®
healthcare taps are tested in accordance with AS/NZS 3718 and leave our
DESCRIPTION
½" BSP – Female
Laminar Flow
Ceramic discs/Jumper Valve
Min
50
Max
500
Min
5
Max
65
5.25
Brass
Chrome
Version 1, 16 August 2023, Page 1 of 5
Document No.: 001.00.10.31
Advertisement
Related Manuals for Galvin Engineering CliniLever CP-BS
Summary of Contents for Galvin Engineering CliniLever CP-BS
- Page 1 CP-BS Lead Safe Hospital Wall Bib Tap Type 54 Fixed 150 PRODUCT CODES DESCRIPTION CLINILEVER CP-BS LEAD SAFE HOSPITAL WALL BIB TAP TYPE 54 FIXED 150 102.22.21.00 CLINILEVER CP-BS LEAD SAFE HOSPITAL WALL BIB TAP TYPE 54 FIXED 150 102.22.11.00 SPECIFICATIONS −...
-
Page 2: Tools Required
− Wall spuds must be 15BSP MI and protrude from the finished wall by no more than 15mm Note: In some situations, a male thread connection on the tap may be more suited. If so, please contact us on 1300 514 074. 1/2" BSP FI SERVICEABLE INLINE FILTER ISOLATION VALVE © Galvin Engineering Pty Ltd... -
Page 3: Installation
Document No.: 001.00.10.31 INSTALLATION INSTALLATION COMPLIANCE: Galvin Engineering products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards. -
Page 4: Troubleshooting
8. Re-assemble top assembly. Follow the product 8. Re-assemble top assembly.Follow the product installation guidelines for the relevant installation guidelines for the relevant product product to re-assemble. to re-assemble. © Galvin Engineering Pty Ltd... -
Page 5: Warranty
Document No.: 001.00.10.31 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied.