Controller General; Controller Type - MDT SCN-RT1UP.01 Technical Manual

Technical Manual
Room Temperature Controller

4.4 Controller general

4.4.1 Controller type

The following picture shows the available settings:
Figure 8: Settings – Controller type
The table shows the available settings:
ETS-text
Controller type
Table 10: Settings – Controller type
The controller type defines the function of the room temperature controller. Target of the control is
to keep an adjusted temperature constant. There are a lot of settings, which can help to achieve this
aim. The settings depend to the adjusted controller type.
By choosing the setting "Controller off", no further settings are possible.
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
14
Phone: +49-2263-880 • knx@mdt.de • www.mdt.de
[SCN-RT1xPx.01]
Dynamic range
[default value]
▪ Controller off
▪ Heating
▪ Cooling
▪ Heating and Cooling
Comment
Adjustment of the controller type
The further settings depend to the
adjusted controller type.