Technical Manual – Room Temperature Controller SCN-RT1
4.4 Controller general
4.4.1 Controller type
The following settings are available at the ETS-Software:
Figure 8: Setting controller type
The chart shows the dynamic range of the controller type:
ETS-text
Controller type
Table 11: Setting controller type
The controller type defines the function of the room temperature controller. Target of the control is
to keep an adjusted temperature constant. There are a lot of settings, which can help to achieve this
aim. The settings depend to the adjusted controller type.
By choosing the setting "controller off", no further settings are possible.
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
16
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Dynamic range
[default value]
▪ Controller off
▪ Heating
▪ Cooling
▪ Heating and Cooling
comment
Adjustment of the controller type
The further settings depent to the adjusted
controller type