Technical Manual
Room Temperature Controller
30
DPT_RHCC
31
Mode selection
32
Manual setpoint value offset
Table 1: Communication objects – Default settings
You can see the default values for the communication objects from the upper chart. According to
requirements the priority of the communication objects as well as the flags can be adjusted by the
user. The flags allocate the function of the objects in the programming thereby stands C for
communication, R for Read, W for write, T for transmit and U for update.
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
8
Phone: +49-2263-880 • knx@mdt.de • www.mdt.de
[SCN-RT1xPx.01]
Send controller status
Select mode
Increase / Reduction (1=+/0=-)
2 Byte
X X
X
1 Byte
X
X X
1 Bit
X
X
Need help?
Do you have a question about the SCN-RT1UP.01 and is the answer not in the manual?