Lexmark 3200 MFP User Manual page 15

Installing the
duplex unit
4
Place the drawer on top of the previously installed drawer or
caster base.
5
Insert two short stabilizer screws (2) into the pockets of the
250-sheet drawer.
The screws go through the drawer and into the top of the
screws of the previously installed drawer or into the caster
frame assembly.
6
Tighten the screws securely.
1
Remove the duplex unit from the carton.
2
Remove all packing material and tape.
3
Use a flat tip screwdriver to remove the rubber feet from the
bottom of the duplex unit.
Assemble paper handling options
11