Lexmark 3200 MFP User Manual page 12

Installing screws
in the 2000-sheet
drawer
Assembling the
caster base for the
500 or 250-sheet
drawer
1
Insert two short stabilizer screws (2) into the pockets of the
2000-sheet drawer.
2
Tighten the screws securely.
3
If you have a duplex unit, go to "Installing the duplex unit" on
page 11 otherwise, go to "Positioning the printer" on page 12.
1
Remove the caster cover, screws, and frame assembly from
the caster box, and place the bag of screws aside for later use.
2
Place the frame assembly on the floor.
3
Align and place the caster cover on the frame assembly.
4
Place the caster base in the location you have chosen for your
MFP.
Assemble paper handling options
8