Installation manual
23
Remount the panels.
5 Marine installation
To ensure steadiness of the machine it is important to fasten the machine to the foundation.
Fasten four fittings to the foundation using four x M10 set screws.
Note!
The four fittings are not supplied with the machine and must be ordered as kit No. 487193544.
Fasten the machine to the fittings.
M10
M10
680 mm / 26 49/64 inch
A
A
A-A
20Nm
Washer
M10
739.4 mm / 29 1/8 inch
M10
M10
793 mm / 31 1/4 inch
fig.X01118
Note!
Marine installation is not applicable for gas heated machines or machines with heat pump.