Newco CX-TOUCH Operation Manual page 20

After the brew cycle is complete,
the above screen will appear and
remain for 2-minutes before
returning to the blue QRC screen.
To get into the Upper Programming mode, tap the upper left corner 3x then the lower right corner 3x. Lower
Programming mode: tap the lower right corner 3x only.
To change from default
"Combined" mode to
"Touchless" only mode tap
the TEA & WATER bar 3-
times to access the
Programming screen.
Upper Programming mode
Touch to highlight the "Combined" box.
Using the minus sign (-) tap until "ON"
appears. If Touch only is desired, repeat
the procedure and tap until "OFF"
appears. Tap "Exit Setup Mode" when
finished. Then tap "Exit Programming".
Lower Programming mode