Operating Instructions; Charging Procedure - Motorola IMPRES NNTN7063 User Manual

09L67_IMPRES_MUC.book Page 4 Tuesday, December 29, 2015 11:17 AM

OPERATING INSTRUCTIONS

The IMPRES Adaptive Charger System is a fully automated battery
care system. All a user needs to do is follow these simple steps:
1. Place the radio/IMPRES battery into the charger.
2. Remove the radio/IMPRES battery when it's fully charged (LED
turns steady GREEN).
The charger pockets accommodate either a radio with an IMPRES
battery attached or an IMPRES battery alone. Prior to charging a
radio with an IMPRES battery, turn the radio off. Batteries charge
best at room temperature.

Charging Procedure

1. Plug the charger end of the power supply cord into the power
receptacle located at the back of the charger.
2. Plug the wall receptacle end of the power supply cord into the
appropriate AC outlet. A successful power-up sequence is
indicated by a SINGLE GREEN BLINK on the charger indicator.
3. Insert an IMPRES battery, or a radio with an IMPRES battery (with
the radio turned off), into the charger's pocket by:
a. Aligning the battery contacts with the charger contacts.
b. Pressing the battery into the pocket, ensuring complete contact
between the charger and battery contacts.
4. To remove a radio or IMPRES battery from the charger, pull straight
up until the charger completely clears the charger housing.
4