Operating Instructions; Charging Procedure - Motorola IMPRES NNTN7584 User Manual

68009268001_DUC_EN.book Page 4 Wednesday, December 30, 2015 2:26 PM

OPERATING INSTRUCTIONS

The IMPRES Adaptive Charger System is a fully automated battery
care system. All a user needs to do is follow these simple steps:
1. Place the radio/IMPRES battery into the charger. Turn the radio Off
when placed in the charger.
2. The radio/IMPRES battery may be removed from the charger when
the LED turns steady GREEN.
The charger's pocket accommodates either a radio with an IMPRES
battery attached or an IMPRES battery alone. Batteries charge best at
room temperature 25°C +/- 5°C (77°F +/- 9°F).

Charging Procedure

1. Plug the power supply charger plug into the power receptacle
located at the back of the charger.
2. Plug the power supply AC plug into the appropriate AC outlet. A
successful power-up sequence results in a SINGLE GREEN
BLINK on each pocket charger indicator.
3. Insert an IMPRES battery, or a radio with an IMPRES battery, into
the charger's pocket :
a. Align battery contacts with the charger contacts.
b. Press the battery into the pocket, ensuring complete contact
between charger and battery contacts.
4. To remove a radio or IMPRES battery from the charger, pull straight
up until the battery completely clears the charger housing.
4