1.9. Indicator State at the Time of Failure Output Reset
When the VX-3000 system is set to enable "Surveillance function," the failure output reset function can be
assigned to a function key.
When the failure output reset function has been assigned to the Function key, the failure status indicator can be
reset by pressing the key. The indicator to the left of the key lights only when the key is pressed.
Notes
• For instructions on setting surveillance function, see the separate Setting Software Instructions, "BASIC
SETTINGS."
• For instructions on assigning functions to function keys, see the separate Setting Software Instructions,
"EVENT SETTINGS."
(Always unlit, not used)
Indicator meanings are as follows:
Indicator
Key ON/OFF Indicator
Chapter 2
Status
Unlit
Lights green
INDICATOR STATUS OF REMOTE MICROPHONES
Key ON/OFF Indicator
Function key (Failure Output Reset key)
When the function key is not pressed
When the function key is pressed (as long as it is pressed)
Meaning
2-8