Indicator State At The Time Of Input Volume Adjustment (Pulse) - Toa VX-3308WM Operating Instructions Manual

·

1.25. Indicator State at the Time of Input Volume Adjustment (Pulse)

When the Input volume adjustment (Pulse) function is assigned to the function key, pressing this key increases
or decreases the volume level of the preset Input channel by the set amount. Sound adjustment status can be
checked by the indicators to the left of the function key.
Note
For instructions on assigning functions to function keys, see the separate Setting Software Instructions, "EVENT
SETTINGS."
Volume Indicator
Indicator meanings are as follows:
Indicator
Selection indicator
Volume Indicator
* Value set in "Event setting" of the VX-3000 Setting Software.
1
* 2 Volume set in "Sound settings (input)" of the VX-3000 Setting Software.
Chapter 2
Selection Indicator
Status
Unlit
Lights green
Unlit
Lights green
INDICATOR STATUS OF REMOTE MICROPHONES
Function key (Input volume adjustment [pulse] key)
When the function key is not pressed
When the function key is pressed (as long as it is pressed)
In the case the set value*
positive (volume increase):
When the current volume adjustment value of the input
channel assigned to this key is less than the initialvalue*
In the case the set value*
negative (volume decrease):
When the current volume adjustment value of the input
channel assigned to this key is greater than the initial
value*
2
In the case the set value*
positive (volume increase):
When the current volume adjustment value of the input
channel assigned to this key is greater than the initial
value* 2
In the case the set value*
negative (volume decrease):
When the current volume adjustment value of the input
channel assigned to this key is less than the initialvalue*
Meaning
1 of the volume adjustment is
1 of the volume adjustment is
1 of the volume adjustment is
of the volume adjustment is
1
2
2
2-23