Table of Contents
Advertisement
1.3.3. Example of broadcasting to the preset zone
You can make broadcasts from the remote microphone to the preset zones only by pressing the Talk key if you
assign the broadcast zone pattern or individual zone to the Talk key in advance.
Note
For instructions on assigning zone pattern or individual zone to talk key, see the separate Setting Software
Instructions, "EVENT SETTINGS."
Step 1. Press the Talk key.
Zones preset to the Talk key will be selected,
and a chime will be broadcast. This chime will be
audible through the monitor speaker built in the
RM-300X.
The Microphone indicator flashes green while
the chime is being activated.
Note
Pressing the Talk key again while the chime is
being activated causes the chime to stop, ending
the broadcast in progress.
Step 2. When the microphone indicator next to the
Talk key lights green, make the microphone
announcement.
Step 3. Press the Talk key.
The broadcast ends.
Broadcast status indicator
Microphone indicator
Yellow
Flashes
green
Yellow Green
OPERATION
Chapter 3
Talk key
3-5
Advertisement
Table of Contents
Need help?
Do you have a question about the VX-3308WM and is the answer not in the manual?