Table Of Contents; Safety; Safe Operating Practices - Toro 03713 Operator's Manual

Contents
Safety ........................................................................... 3
Safe Operating Practices........................................... 3
Setup ............................................................................ 5
Tools Required for Setup .......................................... 5
Installing the Groomer............................................. 6
Installing the Broomer Kit (optional).........................17
Operation ....................................................................18
Adjusting the Groomer Height.................................18
Testing the Groomer Performance............................20
Maintenance .................................................................21
Cleaning................................................................21
Lubrication............................................................21
Inspecting the Blades ..............................................21
Groomer Pulley/Belt Alignment ..............................21
Groomer Binding Troubleshooting...........................22

Safety

This machine has been designed in accordance with EN ISO
5395:2013.

Safe Operating Practices

•
Read, understand, and follow all instructions in the
traction unit and cutting unit operator manuals before
operating the groomer.
•
Read, understand, and follow all instructions in this
operator's manual before operating the groomer.
•
Never allow children to operate the cutting units. Do
not allow adults to operate traction unit or cutting units
without proper instruction. Only trained operators who
have read this manual should operate the cutting units.
•
Never operate the cutting units when under the influence
of drugs or alcohol.
•
Keep all shields and safety devices in place. If a shield,
safety device or decal is illegible or damaged, repair or
replace it before operation is commenced. Also tighten
any loose nuts, bolts, and screws to ensure cutting unit is
in safe operating condition.
•
Always wear substantial, slip-resistant footwear. Do not
operate cutting unit while wearing sandals, tennis shoes,
sneakers or shorts. Also, do not wear loose fitting clothing
which could get caught in moving parts. Always wear
long pants and substantial shoes. Wearing safety glasses,
safety shoes and a helmet is advisable and required by
some local ordinances and insurance regulations.
•
Remove all debris or other objects that might be picked
up and thrown by the cutting unit blades. Keep all
bystanders away from the mowing area.
•
If the blades strike a solid object or the cutting unit
vibrates abnormally, stop and shut the engine off. Check
cutting unit for damaged parts. Repair any damage before
restarting and operating the cutting unit.
•
Lower the cutting units to the ground and remove key
from ignition switch whenever machine is left unattended.
•
Be sure cutting units and groomers are in safe operating
condition by keeping nuts, bolts and screws tight.
•
Remove key from ignition switch to prevent accidental
starting of the engine when servicing, adjusting or storing
the machine.
•
Lightning can cause severe injury or death. If lightning
is seen or thunder is heard in the area, do not operate
the machine; seek shelter.
•
Perform only those maintenance instructions described in
this manual. If major repairs are ever needed or assistance
is desired, contact an Authorized Toro Distributor.
•
To ensure optimum performance and safety, always
purchase genuine Toro replacement parts and accessories
to keep the Toro all Toro. Never use "will-fit"
replacement parts and accessories made by other
manufacturers. Look for the Toro logo to assure
3