Bornack ATTACK User Manual page 5

PREPARATION
ATTENTION:
Put on the harness as described below and
adjust to fit the wearer.
A Lay out the harness so that the leg loops are
not twisted and the EASY GLIDE buckles lie
on the outside.
B Enter the leg loops from the top through the
hip strap and pull up.
C Adjust the hip strap and close: pull the ad-
justment strap on the EASY GLIDE buckles of
the hip strap on both sides to the front until
the hip strap sits tightly and doesn't slip
down.
D The excess strap length can be pushed
through the elastic band ring on the side.
E Close the leg loops: to tighten the EASY
GLIDE buckle, slightly lift with the other hand
and then pull the adjustment straps tight.
F Tighten the leg loops and ensure that a flat
hand can fit between the straps and the
thighs.
G Adjust the leg loops leaving feed guide the
excess ends of the hip strap and the leg loops
through the elastic band ring to tuck away.
ATTACK IN USE
A
C
E
G
B
D
F
EN