Advertisement
3. Using Your Camcorder
3.3 Playback Mode
Videos and photos captured on your camcorder can be easily played back.
3.3.1 Video Playback
Follow the steps below to enter the Video Playback mode.
1. In Video Mode press the MENU button.
2. Use the ZOOM, LEFT or RIGHT buttons to select Playback and press the
PHOTO or OK button to enter the menu.
3. Use the ZOOM, LEFT or RIGHT buttons to select Video and press the
PHOTO or OK button to enter Video Playback Mode.
Follow the steps below to navigate the Video Playback Mode:
1. Press the ZOOM, UP, DOWN, LEFT or RIGHT button to cycle through the
captured videos stored on the memory card.
2. To enter into a video, press the PHOTO or OK button.
3. Press the ZOOM, LEFT or RIGHT button to see the previous or next recorded
video.
4. While viewing a recorded video, press the PHOTO or OK button to start playing
a recorded video, press the PHOTO or OK button again to pause the video and
press the RECORD button to stop the video.
5. While a video is playing, use the ZOOM, UP or DOWN button to increase or
decrease the playback volume.
In Video Playback Mode the following options are available:
3.3.1.1 Delete
This function is used to delete videos. Videos can be deleted singly or all at
once. Deleted videos are permanently deleted and cannot be
recovered.
1. In Video Playback Mode press the MENU button, and use the ZOOM,
UP or DOWN buttons to select 'Delete'. Press the PHOTO or OK
button to enter the 'Delete' submenu.
2. Press the ZOOM, LEFT or RIGHT button to navigate the menu, and
press the PHOTO or OK button for your selected setting (Delete
Current, Delete All).
3. Press the MENU button to exit the menu without deleting any videos.
3.3.1.2 Protect
This function protects the video file. The file will be protected from being
deleted accidentally. Files must be unprotected to be deleted.
23
Advertisement
