Advertisement
3. Using Your Camcorder
3.2.6 Settings – Sharpness
This function adjusts the visible detail of a photograph.
1. In Photo Mode press the MENU button.
2. Use the ZOOM, LEFT or RIGHT buttons to select Settings and press the
PHOTO or OK button to enter the menu.
3. Select 'Sharpness' using the ZOOM, UP or DOWN buttons and press
the PHOTO or OK button to enter the 'Sharpness' submenu.
4. Press the ZOOM, LEFT or RIGHT button to navigate the menu, and press
the PHOTO or OK button to confirm your selected exposure mode (Soft,
Normal, Sharp).
5. Press the MENU button to exit the submenu.
3.2.7 Settings – ISO
This function adjusts the light sensitivity in your photograph.
1. In Photo Mode press the MENU button.
2. Use the ZOOM, LEFT or RIGHT buttons to select Settings and press the
PHOTO or OK button to enter the menu.
3. Select 'ISO' using the ZOOM, UP or DOWN buttons and press the
PHOTO or OK button to enter the 'ISO' submenu.
4. Press the ZOOM, LEFT or RIGHT button to navigate the menu, and press
the PHOTO or OK button to confirm your selected exposure mode (Auto,
100, 200, 400).
5. Press the MENU button to exit the submenu.
3.2.8 Function – Self Timer
This function determines the time delay before a photograph is captured. This
setting can be used by photographers to take photographs of themselves.
1. In Photo Mode press the MENU button.
2. Use the ZOOM, LEFT or RIGHT buttons to select Function and press the
PHOTO or OK button to enter the menu.
3. Select 'Self Timer' using the ZOOM, UP or DOWN buttons and press
the PHOTO or OK button to enter the 'Self Timer' submenu.
4. Press the ZOOM, LEFT or RIGHT button to navigate the menu, and press
the PHOTO or OK button to confirm your selected exposure mode (Off, 2
Seconds, 5 Seconds, 10 Seconds).
5. Press the MENU button to exit the submenu.
3.2.9 Function – Anti-Shake
This function enables photo capture in high speed and low-light by
electronically minimizing motion blur and reducing camcorder shake.
1. In Photo Mode press the MENU button.
20
Advertisement
