Huawei UPS5000-S-300 kVA User Manual page 89

UPS5000-S-300 kVA User Manual
(3P3W, 200 V)
Table 4-7 Battery status
Item
Voltage (V)
Current (A)
Backup time (min)
Remaining cap. (%)
SOH
Maximum cell voltage (V)
Minimum cell voltage (V)
Maximum Cell Temperature
(° C)
Min Cell Temperature (° C)
Total discharge times
Total discharge capacity(Ah)
Table 4-8 Total runtime
Item
Bypass runtime (h)
Inv. runtime (h)
Table 4-9 Environment data
Item
Ambient temperature (° C)
Ambient humid. (%RH)
Issue 01 (2020-03-06)
The value must be an integer. For example:
 If the value is less than 1, the value takes 0.
 If the value is greater than or equal to 1 and less than 2, the value takes 1.
Copyright © Huawei Technologies Co., Ltd.
Description
Voltage of the battery string.
Current of the battery string (the current is + when
batteries are being charged and – when discharged).
Battery backup time estimated at the current load.
Remaining battery capacity.
State of health.
-
-
-
-
Total discharge times of the battery system.
Total discharge capacity of the battery system.
Description
Time for which the UPS runs in bypass mode.
Time for which the UPS runs in inverter mode.
Description
Temperature measured by the ambient temperature and
humidity sensor. (An ambient temperature and humidity
sensor is required. If no sensor is connected, the ambient
temperature sampled by the bypass module is displayed.)
Humidity measured by the ambient temperature and
humidity sensor. If the sensor is not installed, N/A is
4 User Interface
81