Advertisement
Installing the Sport Rack and Tail Light
8a
• Align the front of the rack with the forward rack mounting
position where the rear cross braces meet
• Loosly thread the front bolts on either side of the bike
8c
• Feed the tail light cable along the inside of the non-drive
side of the rack and use small zip ties to secure it in place
8b
• Lower the rear of the rack in line with the rear mounting
points and thread the bolts through the lower slotted holes
• Torque all four bolts to 30Nm with a 5mm Allen key
8d
• Clip the end of the tail light cable into the tail light
• Align the two tail light mounting posts to the rear of the
rack and secure them with the two M4 lock nuts using a
8mm wrench
Advertisement
