Table of Contents
Advertisement
ACS Program Mapping with NFS-3030/NFS2-3030/NCA-2
Dip Switch:
Switch #
1
Manual override: Set "ON" for this application.
2, 3
Expanders installed: Set these switches according to how many expanders are installed at the address. See Section 5.12.3
for ACM-24AT/ACM-48A; see Section 5.13.3 for ACM-16AT/ACM-32A.
4
Not used; set to OFF
5
Receive Only: Set this switch "OFF" for this application.
6
Piezo Disable: Set this switch accordingly.
7
Switch Inhibit: Set this switch "OFF" for this application.
8
Flash Inhibit: Set this switch "OFF" for this application.
I.7 ACS Program Mapping with NFS-3030/NFS2-3030/NCA-2
ACS points "track" or follow those system points they are programmed to annunciate; the annunciator points do not latch. Table I.1, which
follows, lists how the ACS annunciates various devices and functions.
Point Type
Control Module, XPC Circuit,
XPR Circuit, XPIQ Speaker
and Telephone/Strobe
Circuits, XP5-C Circuit
Monitor Module, XPM Circuit
Intelligent Detector
Logic Zone
ACKNOWLEDGE
SIGNAL SILENCE
SYSTEM RESET
1
LAMP TEST
1
With the NFS-3030/NFS2-3030/NCA-2, the functions of ACKNOWLEDGE, SIGNAL SILENCE, SYSTEM RESET and LAMP TEST may
be assigned (mapped) to multiple annunciator points.
NOTE: Control Switches marked "not used" will still function as local LAMP TEST switches for their respective LEDs.
ACS Manual — P/N 15842:N3 5/4/2022
ACM-24AT Function
ACM-48A or ACM-32A Module &
AEM-48A or AEM-32A Expander
Active LED
Indicates on/off status of module or
circuit
Indicates alarm status of module or
circuit
Indicates alarm status of detector
Indicates active status of logic zone Not used
1
Indicates System Alarm
1
Not used
1
Not used
Not used
Table I.1 Annunciator Program Mapping with NFS-3030/NFS2-3030/NCA-2
NFS-3030 Systems (UL 8th), NFS2-3030 Systems and NCA-2 Systems (UL 9th)
Eight-Point Shift: Set to "OFF".
ACM-24AT or ACM-16AT Module and
AEM-24AT or AEM-16AT Expanders
Trouble LED
Indicates trouble status of module
or circuit
Indicates trouble status of module
or circuit
Indicates trouble status of detector
Indicates System Trouble
Indicates Signals Silence
Not used
Not used
ACM-16AT Function
Control Switch
Turns module on/off
Not used
Not used
Not used
ACKNOWLEDGE key
SIGNAL SILENCE key
SYSTEM RESET key
LAMP TEST key
55
Advertisement
Table of Contents
