Table of Contents
Advertisement
Recording
Alarm Output
Access Control
Point
4. Click Save to save and take effect of the parameters.
Card Linkage
Steps:
1. Click to select the linkage type as Card Linkage.
2. Input the card No. or select the card from the dropdown list.
3. Select the card reader from the panel for triggering.
5. Click different tabs to set different parameters. Switch the property from
enable this function.
You can set the parameters of buzzer, recording, alarm output, zone, access control point, and
audio play.
Linkage Type
Buzzer
Recording
Alarm Output
Access Control
Point
4. Click Save to save and take effect of the parameters.
7.10.3 Cross-Device Linkage
Purpose:
Main Elevator Controller User Manual
Capture Status
Alarm Output
Access Control
Point
Linkage Target
Host Buzzer
Card Reader
Buzzing
Capture Status
Alarm Output
Access Control
Point
The real-time capture will be triggered.
The alarm output will be triggered for notification.
The door status of open, close, remain open, and
remain closed will be triggered.
Notes:
The door status of open, close, remain open, and
remain close cannot be triggered at the same
time.
The target door and the source door cannot be
the same one.
Descriptions
The audible warning of controller will be triggered.
The audible warning of card reader will be triggered.
The real-time capture will be triggered.
The alarm output will be triggered for notification.
The door status of open, close, remain open, and
remain closed will be triggered.
Notes:
The door status of open, close, remain open, and
remain close cannot be triggered at the same
time.
The target door and the source door cannot be
the same one.
89
to
to
Advertisement
Table of Contents
