Relay Settings - HIKVISION DS-K2210 User Manual

Main elevator controller

Hide thumbs Also See for DS-K2210:

Table of Contents

 The Remain Open Duration should be between 0 and 1440 minutes. By default, it is 10

minutes.

 You can swipe the first card again to disable the first card mode.

5. In the First Card list, Click Add button to pop up the following dialog box.

1) Select the cards to add as first card for the door

Note:

Set the card permission and apply the permission setting to the access control

device first. For details, refer to Chapter 7.7 Permission Configuration.

2) Click OK button to save adding the card.

6. You can click Delete button to remove the card from the first card list.

7. Click Save to save and take effect of the new settings.

7.8.4 Relay Settings

Purpose:

For elevator controller, you can manage the relationship between the floor and the relay in this

chapter.

Configuring Relay and Floor

Steps:

1. Click Relay Settings tab to enter the Relay Settings interface.

Main Elevator Controller User Manual

Table of Contents